Yes all decoders have their own :) But I had forgotten about mmtty.ini,
it's been a while since I needed to - thanks! - jeff wk6i
On Sun, Feb 26, 2023 at 3:39 PM Rich <rwnewbould@comcast.net> wrote:
> WL/MMTTY does support what you are trying to do with one PC. I do that
> all of the time.
>
> I really do not have a solution to your issue, but you might want to
> check these things.
>
> When using two radios on one PC you need to have MMTTY and 2tone
> installed in multiple folders
>
> ex: /mmtty1/ = K4
>
> ex: /mmtty2/ = K3
>
> A separate copy needs to be run for each radio.
>
> Windows updates can really screw up your audio devices so......
>
> Check your Windows sound settings and make sure enhanced audio is
> disable. For both sound cards that are created when you plug in the USB.
>
> I just drove myself crazy helping a friend with an IC7300 which would
> not receive and that was the issue.
>
> Also make that the audio is 2 ch 48000hz and not only 1 ch 48000hz.
> 1ch will cause MMTTY to ignore the sub-receiver
>
> MMTTY.ini file contains some info on your sound device
>
> SoundDevice=5
> SoundOutDevice=4
>
> You might want to check that also
>
> I truly do not believe any of these would effect your sound device not
> showing up in MMTTY if it is in device manager
>
> but it is worth a try
>
> A windows update seems that most likely cause of the problem
>
> Rich
>
>
> On 2/26/2023 17:15 PM, Jeff Stai wrote:
> > Yesterday for NAQP I wanted to run SO2R with my old K3 and my new K4.
> >
> > I got the K4 running fine in Writelog on MMTTY/2tone with the K4 internal
> > sound card, both receivers in SO2V mode.
> >
> > Then I plugged in the external sound card for the K3. No amount of
> cajoling
> > could get that sound card to show up in MMTTY. It did show up in Device
> > Manager and in the list on 2tone. But I still couldn't get any sound to
> > register in 2tone.
> >
> > I usually run PC per radio but yesterday I wanted to do all this on one
> PC,
> > because that's what I had. This was basically 4 radios - two SO2V
> K-radios.
> > I did get FSK transmit working on the K3 but I couldn't receive.
> >
> > Before I go ripping into the audio path for the K3 and the PC - they had
> > been working fine very recently - Writelog does support this
> configuration
> > - right?
> >
> > 73 jeff wk6i
> >
> > ps I did restarts and wire checks of everything to no avail. The fact
> that
> > the sound card did not show up in MMTTY is kind of a red flag that it was
> > software. Oh and yes each Rttywrite window has its own copy of MMTTY or
> > 2tone.
> >
> >
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
--
Jeff Stai ~ WK6I ~ wk6i.jeff@gmail.com
RTTY op at W7RN
Twisted Oak Winery ~ http://www.twistedoak.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|