Re: [WriteLog] Stumped with DigiRite

["Joe Subich, W4TV" <lists@subich.com>]

> Ed, thanks, but the choices were correct in mixer.

Set them again anyway.  Windows will "adjust" the device IDs
when rebooting, in event of a power interruption to any of
the devices or if the USB connection has been interrupted.
A change to *any* device (even an HDMI monitor) can confuse
Windows' handling of audio devices.

I *STRONGLY* recommend checking and resetting audio device
selections in the WriteLog Mixer control, WSJTX, MMTTY, 2Tone,
and any other application that consumes or generates audio each
time one begins operating.

73,

   ... Joe, W4TV


On 11/29/2024 12:13 PM, ed@w0yk.com wrote:
> Hmm.
>
>   
>
> Has the TX audio been there previously with WL 12.85 & DR 2.2.2.11?
>
>   
>
> What channel is the WL Entry Window set to, L or R?
>
>   
>
> 73,
>
> Ed W0YK
>
>   
>
> From: w4ox@bellsouth.net <w4ox@bellsouth.net>
> Sent: Friday, 29 November, 2024 09:06
> To: 'Ed W0YK' <ed@w0yk.com>
> Subject: RE: [WriteLog] Stumped with DigiRite
>
>   
>
> Ed, thanks, but the choices were correct in mixer.
>
>   
>
> Doug
>
>   
>
> From: Ed W0YK <ed@w0yk.com <mailto:ed@w0yk.com> >
> Sent: Friday, November 29, 2024 11:02 AM
> To: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
> Subject: RE: [WriteLog] Stumped with DigiRite
>
>   
>
> Go into WL Soundcard Mixer and select the RX and TX soundcard choices.  For 
> some reason they get deleted for me every so often.  I haven't figured out what 
> triggers that.
>
>   
>
> 73,
>
> Ed W0YK
>
>   
>
>   
>
> -------- Original message --------
>
> From: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
>
> Date: 11/29/24 07:52 (GMT-08:00)
>
> To: 'Ed W0YK' <ed@w0yk.com <mailto:ed@w0yk.com> >
>
> Subject: RE: [WriteLog] Stumped with DigiRite
>
>   
>
> Thanks, Ed, for the quick reply.
>
>   
>
> WL 12.85D / DigiRite 2.2.11.0
>
>   
>
> For lack of a better description, my rig keys but there is no modulation.
>
>   
>
> Doug
>
>   
>
> From: Ed W0YK <ed@w0yk.com <mailto:ed@w0yk.com> >
> Sent: Friday, November 29, 2024 10:08 AM
> To: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net> ; WriteLog@contesting.com 
> <mailto:WriteLog@contesting.com>
> Subject: RE: [WriteLog] Stumped with DigiRite
>
>   
>
> Hi Doug.
>
>   
>
> What versions of WriteLog and DigiRite are you referring to, and what is the 
> problem(s)?
>
>   
>
> 73,
>
> Ed W0YK
>
>   
>
>   
>
> -------- Original message --------
>
> From: w4ox@bellsouth.net <mailto:w4ox@bellsouth.net>
>
> Date: 11/29/24 07:03 (GMT-08:00)
>
> To: WriteLog@contesting.com <mailto:WriteLog@contesting.com>
>
> Subject: [WriteLog] Stumped with DigiRite
>
>   
>
> All,
>
>
>
> We have all read similar emails, it was working before, but now.
>
>
>
> I am trying to set up for the FT Challenge, and previously had no issue
> using WL & DigiRite for FT8, but for the life of me do not know why DigiRite
> won't work now.
>
>
>
> It is likely some setting I am overlooking as WSJT-X works without issue.
>
>
>
> I am running a 7610, and a MicroHam MK3 with the router software.
>
>
>
> The rig will key, but there is no signal output. In other words, the PTT
> puts the 7610 into transmit, but my LP-100A only reads 0.4W.
>
>
>
> Thoughts?
>
>
>
> TIA, Doug W4OX


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/