Yaesu
[Top] [All Lists]

[Yaesu] FT-1000-D and CAT Support for Software ?????

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-1000-D and CAT Support for Software ?????
From: aa4nu@ix.netcom.com (Billy W. Cox)
Date: Fri, 20 Sep 1996 00:21:26 -0700
Hello ....

A friend of mine has just purchased a used FT-1000-D xcvr and is 
having some problems getting it to work with his NA software that 
worked FB with his TS-940s. He is using the Yaesu interface ...

I recall that the early FT-1000-D DID NOT work with some software
until a chip was changed/updated. So please fill in the blanks ...

1. What serial number ranges did this apply to ?
2. Part number for the chip ? Other changes needed ?
3. Can this be done "in-shack" or only at Yaesu ?
4. Other things to check ?

Thanks ! 73 de Bill AA4NU  aa4nu@ix.netcom.com

--
FAQ on WWW:               http://www.contesting.com/yaesufaq.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 ke7gh@contesting.com
Sponsored by:             Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT-1000-D and CAT Support for Software ?????, Billy W. Cox <=