Hi everyone,
I have a QSYer for a 757-GXII, but my rig is a 757GX. The QSYer for the
GXII has a DIN plug, but the 757GX has a three-prong plug.
I can see that the DIN uses two of the pins (a ground and the black
output wire), so, assuming they're compatible, it should be a simple
wiring job. The problem is I don't have any docs on the 3-pin CAT
interface on the 757GX.
Does anybody know what the three CAT pins are on the 757GX?
(I saw an old post from somebody with the opposite problem (GX QSYer on
GXII rig) , and they mentioned that the middle wire was the only one
hooked up, but I don't want to be guessing with this...)
Thanks,
Jerry McCollom, WC0Z
Hewlett Packard Co., Network and System Management Division
jmc@cnd.hp.com
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|