Yaesu knows more about my MP problems than myself HI HI. I wrote
several letters for people in YAESU USA and Japan.
I´m hopeful to see my rig with no more problems...
* * * * * P Y 2 N Y * * * * *
------ Vitor Luis Aidar dos Santos -------
E-mail: py2ny@supernet.com.br
ax.25: py2ny@py2ze.sp.bra.soam
Mail: p. o. box 190 - Campinas (SP)
Zip: 13001-970 B R A S I L
++++ Also PW2N, in contests ++++
----------
> De: Tyler G Stewart <kf3p@cais.cais.com>
> Para: George Anestis <Anestis@mail.dec.com>; 'yaesu@contesting.com';
'k8ej@ix.netcom.com'
> Assunto: Re: [Yaesu] FT-1000MP bug reports
> Data: Segunda-feira, 23 de Dezembro de 1996 20:01
>
> I would like to suggest to everyone who is discovering bugs with their
MP's
> to please
> make sure that you notify Yaesu about them. I think it's important for
> them to know how many of us are dissatisfied with one thing or another so
> that they will address the situation instead of just letting things
slide.
> Frankly, its starting to sound like they should do a major firmware
> revision as there are a lot of bugs in the "features".
>
> Remember the old saying...the squeaky wheel gets the grease!
>
> 73, Tyler K3MM
>
> ----------
> > From: George Anestis <Anestis@mail.dec.com>
> > To: 'yaesu@contesting.com'; 'k8ej@ix.netcom.com'
> > Subject: RE: [Yaesu] FT-1000MP Keyer
To: <yaesu@contesting.com>
> > Date: Monday, December 23, 1996 2:01 PM
> >
> > Steve,
> >
> > I have been frustrated by this keyer behavior, too. Must be a
> > "feature". I have found no work-around as yet.
> >
> > George Anestis
> >
> > Digital Equipment Corporation
> > 1500 Ardmore Blvd.
> > Pittsburgh, PA 15221
> > 412-244-7302, DTN 422-7302
> > Anestis@mail.dec.com
> >
> > ----------
> > From: k8ej@ix.netcom.com[SMTP:k8ej@ix.netcom.com]
> > Sent: Monday, December 23, 1996 8:20 AM
> > To: yaesu@contesting.com
> > Subject: [Yaesu] FT-1000MP Keyer
> >
> > With the internal keyer dot/dash weighting menu-adjusted to my
> > preference (more weighting on both), I decided to try some of the
> > other
> > keyer features. I use the FH-1 Keypad to activate them.
> >
> > When using the Memory feature the following occurs: As memories are
> > loaded and/or played back the keying characteristics default back to
> > the original Yaesu settings for weighting (which is too choppy for my
> > liking). Also, the speed changes. In addition, from that point on,
> > just using the keyer function with a paddle also results in the
> > default
> > keying characteristics rather than those stored via the menus. The
> > only way to restore my keyer preferences, previously set in menus
> > 7-0,7-1,7-2, is to turn the radio off/on.
> >
> > Anyone else had this experience and figured out an alternative?
> >
> > Tnx/73, Steve.
> >
> > --
> > FAQ on WWW: http://www.contesting.com/yaesufaq.html
> > Submissions: yaesu@contesting.com
> > Administrative requests: yaesu-REQUEST@contesting.com
> > Problems: ke7gh@contesting.com
> > Sponsored by: Akorn Access, Inc & KM9P
> >
> >
> >
> > --
> > FAQ on WWW: http://www.contesting.com/yaesufaq.html
> > Submissions: yaesu@contesting.com
> > Administrative requests: yaesu-REQUEST@contesting.com
> > Problems: ke7gh@contesting.com
> > Sponsored by: Akorn Access, Inc & KM9P
>
> --
> FAQ on WWW: http://www.contesting.com/yaesufaq.html
> Submissions: yaesu@contesting.com
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: ke7gh@contesting.com
> Sponsored by: Akorn Access, Inc & KM9P
--
FAQ on WWW: http://www.contesting.com/yaesufaq.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: ke7gh@contesting.com
Sponsored by: Akorn Access, Inc & KM9P
|