Hey David, I have an AEA DSP 2232 interfaced to an FT1000MP. As I
understand the pin out etc are the same on each radio (unplug the
connector and plug it into either radio). All works as advertised but
you will have to take the FSK output from the 2232 from a different spot
than where you are getting RX audio and the PTT line. I don't know if
this mail helps but 2232 should work with the "D" as well.
> From: David[SMTP:firstname.lastname@example.org]
> Sent: Monday, March 31, 1997 6:23 AM
> To: email@example.com
> Subject: [Yaesu] FT1000 & DSP2232
> Anyone have any luck getting the FT1000D to work with an AEA DSP2232
> TNC? I get receive audio and PTT on both RTTY and Packet. I don't
> get a shift tone on RTTY nor do I get AMTOR/PACTOR tones on Packet.
> Maybe I should give up on the back input and wire an 8 pin mic
> and headphone jack like I did on my ond TS830s. That radio worked
> great on RTTY and other digital modes.
> FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
> Submissions: firstname.lastname@example.org
> Administrative requests: yaesu-REQUEST@contesting.com
> Problems: email@example.com
FAQ on WWW: http://www.primenet.com/~ke7gh/yaesu.html
Administrative requests: yaesu-REQUEST@contesting.com