Sandy wrote:
>PKT/LSB will be AFSK (tones determined by SHIFT, MARK and SPACE
>parameters in the KAM. I use 2110/2310 with SHIFT set to MODEM. You
>should also set dip switches 2 and 3 in the 990 to match these settings.
>If you don't do this, you will be unable to zero-beat or be "on
>frequency" with the other guy. Also set the FSinv parameter in the Kam
>Plus to ON.
I wonder if anyone has had a similar "dip switch" problem with the FT-1000?
In order to be zero-beat with the other station I've always had to set the XIT
to -0.83 kHz. Maybe there was a misprint in manual too. Any suggestions?
73 de Walt Kornienko - K2WK - zak@goes.com
--
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Submissions: yaesu@contesting.com
Administrative requests: yaesu-REQUEST@contesting.com
Problems: owner-yaesu@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|