Yaesu
[Top] [All Lists]

[Yaesu] Re: FT-847 (transverter port)

To: <yaesu@contesting.com>
Subject: [Yaesu] Re: FT-847 (transverter port)
From: dgf@netcom.com (David Feldman)
Date: Mon, 2 Mar 1998 14:43:48 -0800 (PST)
"Ronald K. Long" <rlong@osu.edu> writes,

>>some peoples eyes, but what happened to the VHF radio
>>that covered 23cm? the FT-847 won't!
>
>Maybe this is not such a big deal. Down East Microwave promises a 144 MHz
>to 1.2 GHz transmit-only converter for about $400 with an output power of

It _is_ a big deal for this reason - Yaesu has evidently CHOSEN not to put
a transverter port on the FT847. This means you now have to deal with 50
watts of RF to somehow get rid of when you convert from 2 meters to 1296
(or whatever other choice microwave band you like). It's a simple, 
inexpensive thing (a transverter port) but the designers must have decided
they'd rather leave it out. The DEM transverter and most others take just
a few milliwatts of RF drive; building something to pad out the excess
power could work, but would be much more expensive than a transverter
port, expose the transverter to high RF if it (the pad) didn't work right,
and you would have the real potential of leakage at 2 M or wherever if
a cable or connector wasn't quite right (you can hear a few milliwatts of
leakage over quite a distance on VHF/UHF bands!)

So I say boooooooo to Yaesu for leaving this out.

73 Dave WB0GAZ dgf@netcom.com


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] Re: FT-847 (transverter port), David Feldman <=