[Top] [All Lists]

[Yaesu] RS-232 interface with FT-990 help requested

To: <yaesu@contesting.com>
Subject: [Yaesu] RS-232 interface with FT-990 help requested
From: gam@wxs.nl (Gerben A.Menting)
Date: Thu, 6 Aug 1998 07:12:46 +0200
Who can help me,
>I have to use pin 2 and 3 of the CAT plug but I am not sure to what I have to
connect them.
>My interface is universal and I have a Txd/Rxd + and Txd/Rxd - available so
>it should be working with almost all radio types. However, what should I
>use for the FT-990? Next question is, Txd to pin 2 and Rxd to pin 3 or the
>other way around?

>Once this is connected correctly, how can I check if it works, in case I do
>not see any interaction between the radio and DX4WIN. I have checked my
>interface according to the instruction from the person who has build it.

Please contact me directly at gam@wxs.nl
Gerben A.Menting

FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>