Sean, See Power Up Slections on page 17 of the manual. Push and hold the
1.5 and 7 MHz band keys on the keypad while switching the power on. Yeasu
will be displayed, followed by a ROM version number. My rig is 3E3XXXX
and has a ROM version of 6.0. So, yours should be OK.
73, Bill KB3AUG
On Sat, 08 Aug 1998 05:48:27 +0000 Sean Warner K0XQ <email@example.com>
>Anyone have problems when using the W1GEE CAT interface & DX4WIN, with
>Here's what happens.......I set the rig, baud rate to 4800, & polling
>to 1000 ms. I click 'save', & then the CAT light blinks
>only one. I know that DX4WIN flashes the 'EPROM 6.0 or better is
>but being fairly new to the 1000D (bought it used, about a week ago,
># 4G380031) I don't know the front panel 'button push(es) ' to check
>firmware version. Manual says nothing.
>Any hints or help will be gratefully accepted & appreciated.
>TNX es 73 de K0XQ
>FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
>Administrative requests: yaesu-REQUEST@contesting.com
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
FAQ on WWW: http://www.qsl.net/k7on/yaesu.html
Administrative requests: yaesu-REQUEST@contesting.com