[Top] [All Lists]

[Yaesu] FT101ZD question

To: <yaesu@contesting.com>
Subject: [Yaesu] FT101ZD question
From: LOMAX1@prodigy.net (frank ayers jr)
Date: Fri, 28 Aug 1998 14:32:11 -0400
Hi all
I have an FT101ZD that I'm planning to use as an IF with DEM VHF
transverters. I know that Yaesu made a transverter for this rig. I have the
schematic for the 101 but not the transverter although the 101 book shows
the hookup.
My question - it seems that the keyed connector on the back has a jumper
for filaments. Am I correct in assuming that to use it with a transverter
you break that connection leaving the driver fil on but turning the 6146's
Anybody been there done that?



FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT101ZD question, frank ayers jr <=