Yaesu
[Top] [All Lists]

[Yaesu] BCI on FT-1000

To: <yaesu@contesting.com>
Subject: [Yaesu] BCI on FT-1000
From: slay@netcom.com (Sandy Lynch)
Date: Fri, 26 Mar 1999 11:57:55 -0800 (PST)
> From: "Nick Kennedy" <nkennedy@cswnet.com>
> To: <wa3gin@erols.com>
> Subject: Yaesu List
To: <yaesu@contesting.com>
> Date: Fri, 26 Mar 1999 13:04:47 -0600
> 
> Anyway, I'm wanting to post a message about my FT-1000's susceptibility =
> to being overload by a local 610 KHz AM broadcast station.
> 
> Thanks and 73,
> 
> Nick, WA5BDU
> 

I had exactly the same trouble with my FT-1000D, when I moved to
my current QTH.  Approximately 1 mile away (or less) are a number
of FM and TB broadcast transmitters ... but worst of all ... is
an AM broadcast station on 970 KHz.  My radio was "useless"
UNTIL I purchased a high pass filter from I.C.E. which substantially
attenuates all signals below 1.8MHz.  The S9+40db trash dropped to
almost nothing.  I'll have to check the model number ... but I think
it is a 401X or 402X .... cost abaout $40, but a true God-send.
If you need the exact model number, send me an email and I'll get the 
info for you.


My only problem now remains on the low end of 80m
where I am using a vertically polarized antenna.  A tuned stub
may be used in the future to eliminate that problem.

73, Sandy W7BX@arrl.net
Portland, Oregon

--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>