Yaesu
[Top] [All Lists]

[Yaesu] Using transverters with the FT-902DM

To: <yaesu@contesting.com>
Subject: [Yaesu] Using transverters with the FT-902DM
From: k3gm@home.com (K3GM)
Date: Tue, 1 Feb 2000 19:04:53 -0500
I would like to use my venerable FT-902DM as an I.F. for a couple of
transverters.  I *think* I need to find a way of shutting off the screen
grid voltage to the 6146's to disable them when transmitting.  I plan to use
the "RF Out" jack which exits right before the PA of the '902.  Does anyone
know if I'm on the right track?  The FTV-901 transverter uses a cable
attached to the accessory socket, but I'm not sure what pins it uses.  I'd
appreciate any assistance you can offer.

Thanks,
Tom K3GM




--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>