Yaesu
[Top] [All Lists]

[Yaesu] 990 with AL-80B amp

To: <yaesu@contesting.com>
Subject: [Yaesu] 990 with AL-80B amp
From: dgmaley@soli.inav.net (David G. Maley)
Date: Tue, 18 Apr 2000 08:18:49 -0500 (CDT)
I suspect you are getting RF in somewhere.  What happens if you
connect the amp to a dummy load?
Dave
WA0ZZG


On Tue, 18 Apr 2000, Scott Ginsburg wrote:

> 
> I just bought an AL-80B amplifier and am seeing a weird thing
> happen. When I key the radio with VOX CW, the power output meter on
> the 990 rises to about 15W, then jumps to about 60W which is
> what I'm driving the amp with. I also notice a slight delay in the
> rise of the AL-80B's meters.
> 
> This does not happen if I manually key the radio using the MOX botton.
> When I disconnect the ALC line, the same thing happens. And, I'm not
> running QSK.
> 
> Anyone know what's going on here?
> 
>                                               73,
>                                               Scott
> 
> --
> FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
> Submissions:              yaesu@contesting.com
> Administrative requests:  yaesu-REQUEST@contesting.com
> Problems:                 owner-yaesu@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 
> 


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>