Yaesu
[Top] [All Lists]

[Yaesu] KAM and FT-920...Married!

To: <yaesu@contesting.com>
Subject: [Yaesu] KAM and FT-920...Married!
From: Nate Bargmann <n0nb@networksplus.net> (Nate Bargmann)
Date: Sat, 1 Jul 2000 21:43:58 -0500
Ok, some of this already made it to the list, but part of it
hasn't due to my fat fingers!

Well, folks, as usually happens, I think I figured out the issue
after pressing the panic button.  I wound up setting menu U-46
in the FT-920 to 1700-L, am using the Data-USB mode selection,
am feeding the radio using the data jack on the rear and am
using AFSK.  In the KAM I made sure the MARk and SPace parameters
were set to default (1600 and 1800 repesctively) and set SHift
to MODEM.  I just had a nice QSO with a station in MA, so I'd say
it's working.

Here is  my wiring:

KAM     Color           FT-920 Data jack
Pin 1   White           Pin 1
Pin 2   Blk & Shld      Pin 2
Pin 3   Brown           Pin 3
Pin 6   Purple          Pin 4

Make sure the switch on the rear of the radio is set to AFSK as
well.

Thanks to those who replied.

73, de Nate >>


-- 
 Wireless | Amateur Radio Station N0NB          | "None can love freedom
 Internet | n0nb@networksplus.net               | heartily, but good
 Location | Wichita, Kansas USA EM17hs          | men; the rest love not
   Wichita area exams; ham radio; Linux info @  | freedom, but license."
             http://www.qsl.net/n0nb/           | -- John Milton

--
FAQ on WWW:               http://www.contesting.com/FAQ/yaesu
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] KAM and FT-920...Married!, Nate Bargmann <=