Yaesu
[Top] [All Lists]

[Yaesu] FT1000D pinout for Band Data jack

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000D pinout for Band Data jack
From: k4oj@tampabay.rr.com (Jim White)
Date: Wed, 15 Aug 2001 19:21:19 -0400
This is a multi-part message in MIME format.

------=_NextPart_000_00B1_01C125BF.764CA400
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Quadra on Government FrequenciesI have been putting together an =
interface for automatic antenna selection which runs off the "D" Band =
Data din plug...the new auto switch does NOT appear to be receiving the =
band data:

1) Is there a software control needed to turn on the band data jack on =
the back of the D?

2) The pinout for the band data plug amy be in error...I went by the =
photo in the manual, but the lug as shown on the schematic has different =
phyiscal locations for the pins than the picture shows them as having.

3) When the band data plug is plugged in there is no RF output on the =
rig.

4) The picture show both a Gnd and a TX gnd pin - for band data should I =
be using the gnd or the TX ground?

5) Is there a way to check the band data output - is it a string of DC =
output voltages I can measure on the mete or what...

Hopefully someone else has been down this road before.

Thanks, 73

Jim, K4OJ


------=_NextPart_000_00B1_01C125BF.764CA400
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Quadra on Government Frequencies</TITLE>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<STYLE type=3Dtext/css>BLOCKQUOTE {
        MARGIN-BOTTOM: 0px; MARGIN-TOP: 0px
}
DL {
        MARGIN-BOTTOM: 0px; MARGIN-TOP: 0px
}
UL {
        MARGIN-BOTTOM: 0px; MARGIN-TOP: 0px
}
OL {
        MARGIN-BOTTOM: 0px; MARGIN-TOP: 0px
}
LI {
        MARGIN-BOTTOM: 0px; MARGIN-TOP: 0px
}
</STYLE>

<META content=3D"MSHTML 5.00.3314.2100" name=3DGENERATOR></HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>I have been putting together an =
interface for=20
automatic antenna selection which runs off the "D" Band Data din =
plug...the new=20
auto switch does NOT appear to be receiving the band data:</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>1) Is there a software control needed =
to turn on=20
the band data jack on the back of the D?</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>2) The pinout for the band data plug =
amy be in=20
error...I went by the photo in the manual, but the lug as shown on the =
schematic=20
has different phyiscal locations for the pins than the picture shows =
them as=20
having.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>3) When the band data plug is plugged =
in there is=20
no RF output on the rig.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>4) The picture show both a Gnd and a TX =
gnd pin -=20
for band data should I be using the gnd or the TX ground?</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>5) Is there a way to check the band =
data output -=20
is it a string of DC output voltages I can measure on the mete or=20
what...</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Hopefully someone else has been down =
this road=20
before.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Thanks, 73</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Jim, K4OJ</FONT></DIV>
<DIV>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_00B1_01C125BF.764CA400--


<Prev in Thread] Current Thread [Next in Thread>