Yaesu
[Top] [All Lists]

[Yaesu] FT1000D question

To: <yaesu@contesting.com>
Subject: [Yaesu] FT1000D question
From: k3ky@erols.com (k3ky@erols.com)
Date: Fri, 8 Mar 2002 01:52:42 -0500
P.S. Regarding potential 'fixes' (mods), I know of none, but it
should theoretically be possible to modify the sub-rx board to
disable the switching to the CW filter path. I really would not
recommend this but would be happy to take a look at the
schematic and suggest possible temporary changes that would
keep it in the SSB BW signal path if you are really interested.
73, David K3KY

On 8 Mar 2002 at 0:45, Barry Kirkwood wrote:

> My new (to me) FT1000D sub receiver goes deaf when I switch to narrow
> cw receive. Apparently one is meant to fit a narrow 455 filter in the
> subrx to listen in this mode. I could live with subrx in SSB bandwidth
> while main rx in narrow mode. Does anyone know of a fix that would
> keep the 455 subrx SSB filter in the line at all times? 73
> 
> end
> Barry Kirkwood PhD ZL1DD
> Signal Hill Homestay
> 66 Cory Road
> Palm Beach
> Waiheke Island 1240
> NEW ZEALAND
> www.waiheke.co.nz/signal.htm
> 
> 
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu



<Prev in Thread] Current Thread [Next in Thread>