[Yaesu] Re: Yaesu Digest, Vol 2, Issue 9

[jplourd@attglobal.net (bob plourde)]

Thanks for the response to my question and sorry for this delay.  I have
to borrow time on a friend's machine.

I had a gut feeling about running detuned.  I re-read the manual, a good
place to start, and I learned that the drive control works if processing
is on.  Doing so at a zero level of compression I can run a consistent
10W no problem and the reports are good 599s with a low IMD.

Bob WB1ENV