Hi Rick,
Are you sure you really opened up the solder bridge? The pads are very
close to each other, so to be sure that the short was really removed, I took
a very small (and sharp) jeweller's screwdriver and used it as a knife that
I passed back and forth between the pads to make absolutely certain that the
bridge was removed.
73,
Riki, 4X4NJ
----- Original Message -----
From: "Rick Nichols" <rickn@netdoor.com>
To: <yaesu@contesting.com>
Sent: Saturday, March 08, 2003 3:48 PM
Subject: [Yaesu] FT-1000D Mod
> Can someone help me with the MARS, CAP mods for the FT-1000D? I have
> tried removing the Solder Pad from Jumper 3 but It doesn't seem to do
> anything. It has a PROM version of 6.0.
>
> Thanks
> Rick Nichols
> KD5MGK
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
|