Yaesu
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Yaesu] FT-980 vfo off frequency

from [Wayne Galaugher] [Permanent Link][Original]
To: <yaesu@contesting.com>
Subject: [Yaesu] FT-980 vfo off frequency
From: wgalaugher@shaw.ca (Wayne Galaugher)
Date: Mon Mar 24 16:15:47 2003 
My FT 980 is off frequency by 250 hz  high on all bands all modes.  Tried 
adjusting trim cap onVFO on side of radio but can't pull it down enough.

Any sugestions on how to properly adjust the vfo.

Wayne
VE7ZNU

pls email to my qth at  wgalaugher@shaw.ca
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] FT-980 vfo off frequency, Wayne Galaugher <=
Previous by Date:  [Yaesu] Re: Good rigs for power line noise, Don Putnick
Next by Date:  [Yaesu] Good rigs for power line noise, David Jordan
Previous by Thread:  [Yaesu] Re: Good rigs for power line noise, Don Putnick
Next by Thread:  [Yaesu] Re: (Yaesu) Good rigs for power line noise, Steve Klenc
Indexes:  [Date] [Thread] [Top] [All Lists]