Yaesu
[Top] [All Lists]

[Yaesu] FT-990 CAT

To: <yaesu@contesting.com>
Subject: [Yaesu] FT-990 CAT
From: strom@lime.demon.nl (Kjell W. Strom)
Date: Thu Aug 7 06:32:18 2003
Mike,

My FT-990 was shipped with v. 1.3  and according to the manual the following
codes are  used for setting the mode:

LSB 0
USB 1
CW 2.4 kHz 2
CW 500 Hz 3
AM 6 kHz 4
AM 2.4 kHz 5
FM 6 or 7
RTTY LSB 8
RTTY USB 9
Packet LSB A
Packet FM B

The returned mode data from  the radio should be in the range 0-6. The
filter bandwidth can still be set separately with opcode 8C.

I have not checked if the manual is correct. I have not been writing CAT
software since the FT-757GX and -767...

73,
"Kel"
PB3SM - SM6CPI





<Prev in Thread] Current Thread [Next in Thread>