I have same experience with FT-101ZD.
My opinion,
When you have normal output with others band, the problem not on tube
driver.
It's need to trim the capacitor trimers below chasis on that 101b, you
should trim the capacitor to max output.
Trim the capasitor related to 15 and 10 meter only, you should know which
one that should be trimed.
Firson - YC0LZH
----- Original Message -----
From: <SGTOKIE@aol.com>
To: <yaesu@contesting.com>
Sent: Saturday, August 30, 2003 3:10 PM
Subject: [Yaesu] ft-1o1b
> i recently purchased a 101b that had decreased output on 15 & 10m. the guy
said the driver may be getting bad.....if i replace just the driver tube, do
i need to do any special realignment?........de kd5qwo. david howard
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|