Yaesu
[Top] [All Lists]

Re: [Yaesu] FT-1000D transmit control settings

To: yaesu@contesting.com, john@crew-green.com
Subject: Re: [Yaesu] FT-1000D transmit control settings
From: Jan Erik Holm <sm2ekm@telia.com>
Date: Tue, 21 Dec 2004 08:24:06 +0100
List-post: <mailto:yaesu@contesting.com>
John,

Yes correct! If you do you will get wider. I have tested
this many times.
I turn the drive up so the ALC meter just moves on
highest voice peeks.
I run about 10 - 12 dB processing, seems OK. Also use HC-5
however I cut the lows from it a bit with a simple RC network.

73 seasons greetings / Jim SM2EKM
--------------------------------------
John Nelson wrote:

SM5BSZ shows some very interesting transmit IMD plots for the 1KD on his site but it's not very clear to me how he arrives at them. He seems to be saying that one should avoid operating in the ALC region at all. Is this the case?



_______________________________________________ Yaesu mailing list Yaesu@contesting.com http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>