[Top] [All Lists]

[Yaesu] Removing FT1000D Main Tuning Knob

To: <yaesu@contesting.com>
Subject: [Yaesu] Removing FT1000D Main Tuning Knob
From: "Randy Thompson" <k5zd@charter.net>
Date: Wed, 4 Jan 2006 05:09:40 -0000
List-post: <mailto:yaesu@contesting.com>
I have two FT1000D that both have the same problem.  I can't get the main
tuning knob to come off.

I have removed the rubber ring and gained access to the set screw.  In
loosening the set screws, they came out completely.  I was able to get them
out through the hole in the knob.

However, both knobs show no sign of moving at all.  I am afraid to pull too

Any suggestions?  Everything I have read implies that loosening the set
screw should have made the knob easy to remove.  What am I missing?

Randy, K5ZD

Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>