Hello
Tnx for all for info received about my request. The problem was exactly as
indicated by John W4DJ and Guy ON4AOI I do it my own cable and now the
computer talks with the radio.
73 Alex
YV4BU
-----Mensaje original-----
De: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com] En
nombre de John- W4DJ
Enviado el: Lunes, 29 de Mayo de 2006 01:48 p.m.
Para: yaesu@contesting.com
Asunto: Re: [Yaesu] CAT on FT1000MP Mark V problem...........!!!!
The Cable has to be a straght through cable.
Pin 1 to 1 on the other end
Pin 2 to 2 on the other end etc...
I'll bet thats your problem Test your cable to make sure its a straght
through Cable.
I had to search for an old straght through cable for mine.
GL de John W4DJ
>From: "Alex Seifert YV4BU" <yv4bu-dx@cantv.net>
>To: <yaesu@contesting.com>
>Subject: [Yaesu] CAT on FT1000MP Mark V problem...........!!!!
>Date: Mon, 29 May 2006 12:54:43 -0400
>
>
>Hello
>
>I recently bought an FT1000Mp Mark V, and I have some problems to link the
>radio with the computer. I have a new cable RS-232 for the interface, the
>computers ports are working 100%( works ok with other radios), and I test
>the link with 3 different programs but NO communications with the radio. Is
>any configurations procedure in the radio that I can not see in the manual?
>
>I appreciate any help about that
>
>73 Alex
>YV4BU
>
>
>
>
>_______________________________________________
>Yaesu mailing list
>Yaesu@contesting.com
>http://lists.contesting.com/mailman/listinfo/yaesu
_________________________________________________________________
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|