Yaesu
[Top] [All Lists]

Re: [Yaesu] Yaesu FT450 product review confusion

To: "John Geiger" <n5ten@yahoo.com>, <yaesu@mailman.qth.net>, <yaesu@contesting.com>, <vhfcontesting@contesting.com>, <vhf@w6yx.stanford.edu>, <6meter@yahoogroups.com>, <50mhz@mailman.qth.net>
Subject: Re: [Yaesu] Yaesu FT450 product review confusion
From: "David J Windisch" <davidjw@cinci.rr.com>
Date: Thu, 17 Apr 2008 06:18:11 -0400
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
Buy a used unit, and resign yourself to paying for some home-schooling, 
unless a local can let you educate yourself on his '450.  I've bought and 
sold a few before settling for a modified "grand" ;o)  73 Dave N3HE

----- Original Message ----- 
From: "John Geiger" <n5ten@yahoo.com>
To: <yaesu@mailman.qth.net>; <yaesu@contesting.com>; 
<vhfcontesting@contesting.com>; <vhf@w6yx.stanford.edu>; 
<6meter@yahoogroups.com>; <50mhz@mailman.qth.net>
Sent: Wednesday, April 16, 2008 3:48 PM
Subject: [Yaesu] Yaesu FT450 product review confusion


>I have read both the QST and RSGB product reviews, as
> I have been thinking about buying this radio.
> However, it gets confusing as the reviews seem to be
> in direct conflict with each other in one very
> important.  In the QST review, when it discusses the
> DSP on the radio, if states:
>
> "The NOTCH, SHIFT, and WIDTH functions clearly operate
> within the AGC loop (it's possible to view their
> effects via the S meter)."
>
> However, in the RSGB review of the FT450 they state:
> "The AGC circuitry senses signal levels upsteam of the
> channel filter where the bandwidth is determined by
> the first IF roofing filter.  AGC is applied to the
> signal frequency RF and first IF amplifier stages.  As
> a consequence, strong signals up to 10khz off channel,
> outside the receiver passband but inside the roofing
> filter bandwidth, will result in desensitizitation."
>
> These 2 statements seem to conflict each other.  The
> RSGB statement is depressing to read because, if
> correct, means that the design of the FT450 would make
> it useless in contests and crowded bands because the
> receiver would be constantly getting desensed by
> signals you couldn't even hear!
>
> Do you know which is correct?  It seems confusing to
> have two reviews which conflict each other so much.
> What is your experience with the FT450 overall?  Is it
> useful in a strong signal environment?
>
> 73s John AA5JG
>
>
> 
> ____________________________________________________________________________________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now. 
> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu 

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>