I believe it is only 100kHz unless you press the fast and the up/down. Then
it will give you 1 MHz. I do no think there is a setting for 10 kHz. Not the
answer you were lookig for. Pretty much all of the 1000 series is the same..
the 920 is different...
73 Will WC2L:
----- Original Message -----
From: "Allan Greening" <vk3pa@vk3pa.com>
To: <yaesu@contesting.com>
Sent: Friday, April 25, 2008 11:03 PM
Subject: [Yaesu] ft1000mkv up/dn buttons
> is it possible to change the frequancy shift when using the up/dn buttons
> from 100khz to 10khz? i use this on my ft920's es is gud for a quick
> 10khz qsy up or down tu vk3pa
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|