rsauvan wrote:
> Hi all,
> I have been battling this for a couple of days now. I have had my FT920
> working just fine with AFSK for a couple of years. I decided to try to get it
> to work on FSK. I soldered up a cable with the correct resistor and
> transistor and hooked it all up.I used a spare data plug. I couldnt get it to
> diddle with the new FSK setup. Im thinking my radio isnt seeing the
> Byterunner add on serial com port. Ok, thats fine, Ive had that problem
> before. I decided to put it back together with my AFSK setup which is only a
> couple of cables to the soundcard and I didnt change any of the wiring to the
> original data plug cable for AFSK. I have set and reset the menu items that I
> believe are correct, but,,, when I am in USB data on the radio as I am
> supposed to be, I hear a faint diddle, (it used to be quite loud and able to
> control the volume) but I dont show any power output either. If I switch to
> LSB which Im not supposed to be in, it shows power output, but I cant get the
> "moni" to show on
t
> he display and therefore not hearing anything either. I am sure I have a
> setting wrong somewhere but must be missing something. I am using MTTY and
> Writelog for software. Any ideas??
>
> Thanks-Bob-WT9Q
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
>
I'd look first at the settings in MTTY. Option|Soundcard levels. The
Option|Setup MTTY. On the TX tab, make sure you have the correct COM
port. On the Misc tab, is Sound Card ticked?
73,
Mike NF4L
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|