From the FT-1000 Technical Supplement:
Maximum RF Output Power Setting
Perform the previous procedure, then tune the transceiver to 10.499 MHz, key
the transmitter, and adjust VR3016 for 210 +/- 10 watts on the wattmeter.
> ----- Original Message -----
> From: "Mike Gusky" <k5ux@bellsouth.net>
> To: <yaesu@contesting.com>
> Sent: Saturday, January 17, 2009 6:54 PM
> Subject: [Yaesu] FT1000D
>
>
>> Traded for a FT1000D and found the power was a little high (≥220
>> watts). How do I turn down the power internally. Obviously I can do
>> this with the PWR control, I would like to limit via internal controls.
>> Is their a pot I can reduce internally that will take care of this.
>>
>> Much help appreciated.
>>
>> Mike
>> K5UX
>>
>> _______________________________________________
>> Yaesu mailing list
>> Yaesu@contesting.com
>> http://lists.contesting.com/mailman/listinfo/yaesu
>>
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>
--------------------------------------------------------------------------------
Internal Virus Database is out of date.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.12/1823 - Release Date: 12/1/2008
7:59 PM
_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
|