Yaesu
[Top] [All Lists]

Re: [Yaesu] part needed

To: "Paul Kraemer" <elespe@lisco.com>, <yaesu@contesting.com>
Subject: Re: [Yaesu] part needed
From: "Peter - LC0TC" <peter.lc0tc@combitel.no>
Date: Sun, 19 Jul 2009 14:44:43 +0200
List-post: <yaesu@contesting.com">mailto:yaesu@contesting.com>
Is it possible that the standard crystals are made to a different (wider?)
specification and .have another parallell capacity than that type used by
Yaesu?

Peter LB0K


-----Opprinnelig melding-----
Fra: yaesu-bounces@contesting.com [mailto:yaesu-bounces@contesting.com]Pa
vegne av Paul Kraemer
Sendt: 14. juli 2009 21:21
Til: yaesu@contesting.com
Emne: [Yaesu] part needed

Need part 71800106 HC-18/U 18.0MHz xtal #210045-1
Used in FT-901 counter unit
Have tried "off the shelf" 18 MHz crystals from Mouser and DigiKey
The frequency is correct but they cannot be moved by the corrector variable
cap in the circuit
Am I missing something???
Paul K0UYA

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu
No virus was found in this message as it was received.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.20/2248 - Release Date: 07/19/09
05:57:00

_______________________________________________
Yaesu mailing list
Yaesu@contesting.com
http://lists.contesting.com/mailman/listinfo/yaesu

<Prev in Thread] Current Thread [Next in Thread>