[Top] [All Lists]

[Yaesu] APF

To: Yeasu Reflector <yaesu@contesting.com>
Subject: [Yaesu] APF
From: jcowens1@comcast.net
Reply-to: jcowens1@comcast.net
Date: Tue, 6 Nov 2018 16:44:15 -0800 (PST)
List-post: <mailto:yaesu@contesting.com>
You will find the APF control useful to reduce band noise. Tune into a band at 
an open freq and adjust you APF while watching your S-Meter. My APF is on all 
of the time and usually around a setting of 1 which is where it reduces the 
band noise considerably. If I need it to peak a CW signal, I then move it to 
the correct setting to peak the signal I am trying to listen to. Other than 
that, my APF is on all the time and usually at a setting around 1. Try it while 
watching you S Meter. You will find it reduces band noise while not 
significantly affecting signals in the bandpass. 

John Owens - N7TK
Yaesu mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [Yaesu] APF, jcowens1 <=