Amps
[Top] [All Lists]

[AMPS] AL80A / IC765

To: <amps@contesting.com>
Subject: [AMPS] AL80A / IC765
From: km1h@juno.com (km1h @ juno.com)
Date: Thu, 06 Nov 1997 09:18:32 EST
On Wed, 5 Nov 97 12:54:25 CST ehayes@VNET.IBM.COM writes:
>I have an older al80a and a new (to me) Icom 765.  The amp specs
>indicate the transmit relay is 12 volts DC.  The 765 manual shows
>24 vdc on the send line.  Do I need to install a voltage divider
>to keep from overdriving the amps relay?
>Thanks,
>Wayne  AJ5M  ehayes@vnet.ibm.com
>
>

No, the IC 765 relay coil voltage is 12V but the contacts are what takes
the AL-80A line to ground. "Aint" no problem.
73  Carl  KM1H

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>