Amps
[Top] [All Lists]

[AMPS] High Potential Tester (high-pot) Components

To: <amps@contesting.com>
Subject: [AMPS] High Potential Tester (high-pot) Components
From: wrt@eskimo.com (Bill Turner)
Date: Sun, 18 Jan 1998 23:59:44 GMT
On Sun, 18 Jan 98 15:49:13 -0800, Rich Measures <measures@vc.net>
wrote:
<snip>
>I had a transformer here, but I sold it to a fellow who needed a high-pot 
>tester..  However, a friend who has one measured the secondary v at c. 
>600v with 12v on the 120v primary.  Are you sure you are not putting the 
>120v on the 240v primary tap?  If the measured ohms across the line cord 
>plug is 18 ohms, you are wired for the 240v tap.   The 120v tap is a 
>center tap on the winding. 
<snip>
_______________________________________________________________
Hmmmm...  I measure 12.7 ohms across the primary.  A true center tap
should be 9 ohms.  Maybe something is wrong with mine.

73, Bill W7TI


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>