Amps
[Top] [All Lists]

[AMPS] Contemplating Building of First amp

To: <amps@contesting.com>
Subject: [AMPS] Contemplating Building of First amp
From: wrt@eskimo.com (Bill Turner)
Date: Fri, 06 Feb 1998 01:52:40 GMT
On Thu, 05 Feb 1998 16:08:44 -0500, Doug Person <ki6bq@ibm.net> wrote:

>I am contemplating a first attempt at building an amplifier.  I am
>thinking of one that could produce a half KW (or more)on all bands from
>160 through 10 meters, be seriously rugged with a heavy duty cycle, and
>yet be made of parts that are readily available.
>
>I have been reading the posts to this reflecter and have been most
>impressed with the kind of knowledge possesed by several participants.
>
>It has become more and more difficult to find interesting projects with
>which to enjoy this hobby (I've built so many antennas), that I thought
>assembling an amp would be interesting, educational, fun, and result,
>hopefully, in a very usable piece of equipment.
>
>I would sincerely welcome everyone's input.  What type of tubes, power
>supply, meters, etc would be best for a first amp?  Source of parts?
>Potential cabinet sources?
>
>Tnx es 73 to all,
>
>Doug -- W4DXV
_______________________________________________________________
I'm sure you'll get lots of good advice, but I'd like to pass along
something I learned the hard way:  Use really large wire in your tank
coil, especially on 10 meters.  Wire that works fine for 40 or 20 will
overheat on 10.  The ARRL handbook has a chart of recommended wire
sizes for each band - believe it!  For my 1500 watt amp I eventually
got up to #4 solid copper earth ground wire before things ran cool
enough.

73, Bill W7TI


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>