As most of you know I sell the YC-156. As far as 6M is concerned the tube
will work fine. It is rated to 110 mc for full output. In some MRI
applications it was operated in the 60 mc area. The tube has a gain of 200
so 100 watts and 4.5kv will get you well over the legal limit.
If anyone has specific construction questions contact me direct
73, Norm N8RGR
At 07:04 PM 12/3/98 -0700, you wrote:
>
>Hello all!
>
>Does anyone have any experience or information as to how the Eimac YC156
>would play on 6M, especailly at 4 to 4.5 KV?
>
>Not really looking for a great amount of power out, just hoping to get
>legal-limit with a quiet blower!
>
>Would 100 watts of drive result in 1500 watts out?
>
>Any help would be appreciated.
>
>TNX, Barrie, W7ALW
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|