Amps
[Top] [All Lists]

[AMPS] Hold on - SWR meter placement

To: <amps@contesting.com>
Subject: [AMPS] Hold on - SWR meter placement
From: jono@enteract.com (Jon Ogden)
Date: Fri, 8 Oct 99 09:40:54 -0500
measures wrote:

AG6K>>>?  In a slotted line, when the swr is less than perfect, the voltage on 
AG6K>>>the line varies with position.  
>>
KE9NA>>What is "less than perfect" SWR, Rich?  I thought SWR was a ratio of max 
kE9NA>>voltage to min voltage on the line.  What is meant by "less than 
perfect"?
>>
AG6K>More than 1 to 1.  

Actually, now that I re-read your original comment, I agree and disagree.  With 
VSWR of greater than 1:1, the voltage on the line does vary with position.  I 
thought I said that when I talked about slotted line measurements.  However, 
the voltage varies with position regardless of whether there is a VSWR of more 
than 1:1 or not!  So you aren't completely correct.

Since the input signal is a sine wave or some other sort of periodic function, 
by definition, the voltage varies as you move up and down the line.  With a 
VSWR of 1:1, that voltage STILL varies, the RATIO of peak to minimum voltage is 
1:1.  With a VSWR of greater than 1:1 though, the RATIO of peak to minimum is 
STILL constant down the line.  And since the VSWR is that ratio, it is hence, a 
constant.

73,

Jon
KE9NA


--------------------------------------------------------------------------
The Second Amendment is NOT about duck hunting!


Jon Ogden

jono@enteract.com
www.qsl.net/ke9na

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>