measures wrote:
>>>>>> ? RMS is equivalent DC heating ability. For example, with a
>>>>>> sine-wave,
>>>>>> 200w-pk would have the heating ability of 100DC watts. .
>>>>
>>>>This "200w-pk" is a peak instantaneous power. Peak instantaneous power
>>>>is a notion with very little physical meaning, and no practical use.
>>>>Ignore it - its only power is to confuse.
>>>>
>>>This is essentially how the FCC measures PEP.
>>
>>I cannot believe that.
>>
> I realize this, Ian.
>
>With a 50-ohm load, 387.3v-peak indicates 1500w PEP on the wattmeters the
>FCC uses.
Yes, obviously. There is nothing wrong with that "v-pk" calculation.
What I cannot believe is that the FCC make any use of the quantity that
you call "w-pk".
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.demon.co.uk/g3sek
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|