[AMPS] RF Choke Forms

To:	<amps@contesting.com>
Subject:	[AMPS] RF Choke Forms
From:	amps@txrx.demon.co.uk (Steve Thompson)
Date:	Sat, 15 Jan 2000 08:18:54 -0000


-----Original Message-----
From: Arne Gjerning <gjerning@flash.net>
To: Amp Ref <amps@contesting.com>
To: <amps@contesting.com>
Date: 15 January 2000 06:15
Subject: [AMPS] RF Choke Forms


>I have been advised NOT to use Teflon, Delryn, and a few
other
>insulating materials for an RF choke. Instead only use
ceramic. It was
>then stated the "D" factor was the reason.
>
I'm not familiar with delrin, but I can't believe there
could be any electrical problem with PTFE/Teflon.

Steve


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] RF Choke Forms, Arne Gjerning [AMPS] RF Choke Forms, Mike Sawyer [AMPS] RF Choke Forms, dan hearn [AMPS] RF Choke Forms, Larry Molitor [AMPS] RF Choke Forms (Epoxy), Michael McCarthy, W1NR [AMPS] RF Choke Forms, Ian White, G3SEK [AMPS] RF Choke Forms, Larry Molitor R: [AMPS] RF Choke Forms, Maurizio Panicara [AMPS] RF Choke Forms, Phil Clements [AMPS] RF Choke Forms, Steve Thompson <= [AMPS] RF Choke Forms, measures [AMPS] RF Choke Forms, measures [AMPS] RF Choke Forms, measures [AMPS] RF Choke Forms, measures [AMPS] RF Choke Forms, Larry Molitor

Previous by Date:	[AMPS] RF Choke Forms, Arne Gjerning
Next by Date:	[AMPS] Simplified Approach To Power Measurement, Peter Sundberg
Previous by Thread:	[AMPS] RF Choke Forms, Phil Clements
Next by Thread:	[AMPS] RF Choke Forms, measures
Indexes:	[Date] [Thread] [Top] [All Lists]