>
>What is the typical bias current requirement for a 3-500Z in AB2 with 3100
>volts of plate current for quality SSB operation. I heard numbers ranging
>from 50 mA to as high as 125 mA.
75mA is ok. 60mA and lower makes feculence
>What is the typical cathode to grid
>voltage at this bias level.
>
depends on anode voltage
cheers, Steve
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|