To: | <amps@contesting.com> |
---|---|
Subject: | [AMPS] Chokes |
From: | W8JI@contesting.com (Tom Rauch) |
Date: | Tue, 14 Mar 2000 08:14:38 -0500 |
> I have taken a picture of the plate choke and parasitic suppressor. The > choke is 25 turns on a 1.25 inch form; 1 inch long. I measured the L of > the thing, and it is 110 uh; so there is lots of ferrite under all that > Teflon! The inductance less than ten times what it would be with only air. I expect we would find powdered iron inside, and not off-the-shelf ferrite rods. 73, Tom W8JI w8ji@contesting.com -- FAQ on WWW: http://www.contesting.com/ampsfaq.html Submissions: amps@contesting.com Administrative requests: amps-REQUEST@contesting.com Problems: owner-amps@contesting.com Search: http://www.contesting.com/km9p/search.htm |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [AMPS] Receiver performance, Tom Rauch |
---|---|
Next by Date: | [AMPS] Receiver performance, Peter Chadwick |
Previous by Thread: | [AMPS] Chokes, Phil Clements |
Next by Thread: | [AMPS] Chokes, Radio WC6W |
Indexes: | [Date] [Thread] [Top] [All Lists] |