Amps
[Top] [All Lists]

[AMPS] Receiver performance

To: <amps@contesting.com>
Subject: [AMPS] Receiver performance
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Wed, 15 Mar 2000 07:59:48 +0000
Tom Rauch wrote:
>Hi ian,
>
>> When doing a comparative review of several DSP audio filters, I found that
>> most - but significantly not all - units gave good CW filtering
>> performance right down to the lowest signal/noise ratios. I had been
>> expecting to hear "on or off" quantization effects at low levels, but
>> there was no sign of that because the noise added random dither to the
>> incoming signal and avoided the threshold effects. The "noise reduction"
>> feature was universally useless at low signal levels, as you might expect.
>
>That's because the filters you tested are after the receivers analog 
>selectivity. Look at the 756PRO reviews coming out, where it is 
>compared to things like the 1000MP.
>

Which "that" are you referring to, Tom - the good low-noise performance
of the selective DSP filters, or the ineffectiveness of the DSP noise
reduction?

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>