Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[AMPS] sb220 on 6m

from [ <w6nq@rfparts.com (W6NQ)] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [AMPS] sb220 on 6m
From: W6NQ" <w6nq@rfparts.com (W6NQ)
Date: Thu, 11 May 2000 08:06:19 -0700 
What has been found to be the best way in handling grounding of grids for
6m?  Direct connection or through convential parallel resistor/cap
combination?
............Thanks,  Merit W6NQ


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [AMPS] Delete if not interested, Off topic, Phil Levin W2GE
Next by Date:  [AMPS] sb220 on 6m, measures
Previous by Thread:  [AMPS] Delete if not interested, Off topic, Phil Levin W2GE
Next by Thread:  [AMPS] sb220 on 6m, measures
Indexes:  [Date] [Thread] [Top] [All Lists]