| To: | <amps@contesting.com> |
|---|---|
| Subject: | [AMPS] 811A Plate Impedance? |
| From: | Peter_Chadwick@mitel.com (Peter Chadwick) |
| Date: | Mon, 16 Oct 2000 13:37:30 +0100 |
Tom says:
>Tank efficiency is roughly (1-Ql/Qu) * 100
>For an unloaded Qu of 250 and loaded Ql of 10, efficiency is 96%
>For an unloaded Qu of 250 and loaded Ql of 20, efficiency is 92%
>Loss roughly doubles from 4% to 8%, but some of the loss is not
>in the tank.
So doubling the Q does not double the circulating current?
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [AMPS] AMERITRON AL80A, Peter Chadwick |
|---|---|
| Next by Date: | [AMPS] AMERITRON AL80A, Tom Rauch |
| Previous by Thread: | [AMPS] 811A Plate Impedance?, measures |
| Next by Thread: | [AMPS] A new question GI7b in GG conf., Peter Frenning, OZ1PIF |
| Indexes: | [Date] [Thread] [Top] [All Lists] |