>
> I seem to recall that the proper way to tune amps. that
>were a bit less than stable, was to always start with the
>loading capacitor fully meshed.
Start with heavy loading/fully unmeshed Load cap. to minimize grid
current.
>Perhaps some of our
>amp gurus can shed some more light on this practice.
>
Too light loading is a malprctice, Roger
>
end
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|