>
>The following link will take you directly to the Acrobat pdf data sheet
>for the HV PCN resistors manufactured by RCD.
>http://www.rcd-comp.com/rcdpdf/PCN.PDF
// Tnx fer the URL, Ken.
According to the joule ratings, the PCN5 would handle a SB-220, and the
PCN50 would handle a "tetrode with handles" amplifier.
cheers
>Ken K4XL
>k4xl@arrl.net
>*** BoatAnchor Manual Archive ***
>On the web at http://bama.sbc.edu or
>FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
>
>
>----- Original Message -----
>From: <ToddRoberts2001@aol.com>
>To: <amps@contesting.com>
>Sent: Saturday, September 08, 2001 11:05 PM
>Subject: [AMPS] GLITCH RESISTORS - SOURCE
>
>
>>
>> Check out RCD resistors at www.rcd-comp.com. Go to their resistor page
>to HV
>> listings - look up PCN SERIES. They have non-inductive solid-ceramic
>> construction. Sizes 2W-5W wire leaded would be excellent for standard
>> parasitic suppressor construction. Larger sizes 10W-270W designed for
>> mounting clips. 50W size rated to 70KV max pulse voltage - dimensions
>7.28"
>> long x .788 dia. Larger sizes would be excellent for building a custom
>> non-inductive dummy load also. 73 Todd Roberts WD4NGG .
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|