>
>Switch wafers from a no. of amps would undoubtedly work, but I have never
>been able to buy the wafers alone, and I don't want to buy an index ass'y. I
>don't need (wasted money), which is why I will be happy to see wafers alone
>being sold on the mkt. again, as they were many years ago!!
> carl / kz5ca
// My SB-220 is >18 years old. It still has the original output
bandswitch wafer, as does my TL-922. However, neither one still has the
original high-Rp parasite suppressors. Neither amplifier has
experienced a filament/grid shorted 3-500Z.
cheers, Carl
>----- Original Message -----
>From: "Tom Rauch" <w8ji@akorn.net>
>To: "Don McConnell" <ve7ehp@telus.net>
>Cc: <amps@contesting.com>
>Sent: Tuesday, September 11, 2001 8:44 PM
>Subject: Re: [AMPS] sb-200 band switch
>
>
>>
>> > i am looking for a band switch for a heathkit sb-200.
>> > thanks don ve7ehp
>>
>>
>> Wafers from the AL80B switch can be moved to the SB-200 if you
>> have a damaged wafer.
>> 73, Tom W8JI
>> W8JI@contesting.com
>>
>> --
>> FAQ on WWW: http://www.contesting.com/FAQ/amps
>> Submissions: amps@contesting.com
>> Administrative requests: amps-REQUEST@contesting.com
>> Problems: owner-amps@contesting.com
>>
>>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|