Tom Rauch wrote:
>> >I could only run the bridge rectifier program
>>
>> Double-click at the *top left* or *bottom left* corner of the
>> schematic to change the rectifier configuration. Double-click *on* the
>> rectifier to select the diodes from the drop-down list.
>
>Doesn't work. I can double click all over the place and it stays a
>bridge. The help file says to doubleclick, you say to double click,
>but nothing happens.
>
>I have version 1.0.3.10 downloaded.
The current version (since March) is 2.0.1 build 32, downloadable from:
http://www.duncanamps.com/psud2/download.html (855KB).
It could be that will fix your Pegasus problem also.
73 from Ian G3SEK Editor, 'The VHF/UHF DX Book'
'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.com/g3sek
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|