Let me know what you're looking for in a plate xfmr, I may have something
suitable. Probably something much more suitable for a FW bridge, as opposed
to a doubler, which places more demand on the xfmr.
"Each success only buys an admission ticket to a more difficult problem." --
Henry Kissinger
> -----Original Message-----
> From: KG6DV@cs.com [SMTP:KG6DV@cs.com]
> Sent: Friday, September 28, 2001 3:03 PM
> To: amps@contesting.com
> Subject: [AMPS] Thanks for 2x 813 info
>
> To those of you who sent info in response to my request for construction
> details for a pair of 813's on 160m ..... I say thanks. Several
> references to past ARRL handbook features were sent along with suggestions
> That I may want to look in W6SAI's handbook. I have several issues of the
> W6SAI hand book. What are the odds that he wrote a great article on this
> very subject but that it would not be in any issue I owned ...... answer,
> 100%
>
> I found at the local library the issue that I had been told about by sever
> of you and am now well underway toward collecting the parts that the parts
> list called for. I had a lot of the parts and have easily found the others
> with The lone exception of a decent plate transformer. all in due time.
>
> Thanks again for the help
>
> Ron Ellis KH6DV
>
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|