Amps
[Top] [All Lists]

[AMPS] Tuned Input, what me worry

To: <amps@contesting.com>
Subject: [AMPS] Tuned Input, what me worry
From: g8gsq@qsl.net (Steve Thompson)
Date: Tue, 9 Oct 2001 07:48:10 +0100

-----Original Message-----
From: Steve Katz <stevek@jmr.com>
To: 'KG6DV@cs.com' <KG6DV@cs.com>; amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 09 October 2001 00:03
Subject: RE: [AMPS] Tuned Input, what me worry


>
>Ron, doesn't a 1dB pad only provide 1dB of impedance stabilization?
>
>Think about it, and then have a beer.  I'll have one, too!
Nonono, beer first!

Anyway, a 1dB pad provides a 2dB improvement - drive power goes through the
pad, some or all gets reflected, goes through the pad again before the
driver sees it. With 3 dB pad, you can't get worse than 3:1 VSWR, even if
the output end is open/short/any phase. A 6dB pad guarantees you about 2:1
max.

Steve


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>