Amps
[Top] [All Lists]

[AMPS] Recognized Amplifier Experts

To: <amps@contesting.com>
Subject: [AMPS] Recognized Amplifier Experts
From: 2@vc.net (2)
Date: Sat, 3 Nov 2001 19:38:06 -0800
>
>
>> Bingo.  If he had ever experimented with an amplifier that had adjustable
>> filament V. he would know that once RF output reaches normal PEP, there
>> is virtually no further increase in RF output as filament V is increased.
>
>Careing to set the filament voltage to obtain the proper emission, rather
>than only keeping a fixed voltage, should extend the tube life noticeably
>without affecting gain and output power.
>
Set fil. V to the nominal value, tune for max P-out with max drive.   
Decrease fil. V until P-out just begins to drop.  Increase fil. V c. 2%.  
Recheck every 500 or so hours.

cheers, Mauri
ciao

-  R. L. Measures, 805.386.3734,AG6K, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>